Replacement Kitchen Drawers for 10 Dollars Each

Posted by admin on February 24th, 2010 and filed under birch plywood | 23 Comments »

My pressed cardboard 3 1/2 ” tall drawers are worn out. I am replacing them with homemade lockjointed drawers that have 3/8″ sides and backs and a 1/4″ bottom. Materials are select pine sides and 1/4″ birch plywood. Router table can be set for thicker side and back stock. Am incorrect saying rout right to left using the handheld. Right to left at the router table, left to right using the handheld.

Duration : 0:4:59

Read the rest of this entry »

Mesa Boogie Factory Tour-Building Boogie Cabs

Posted by admin on January 1st, 2010 and filed under birch plywood | 7 Comments »

http://www.premierguitar.com PG’s Joe Coffey is On Location in Petaluma, CA, where he tours the Mesa Boogie factory. In fourth part of the tour, we see how Mesa Boogie builds their cabs, including the CNC cutting process, sanding and gluing, sanding and why Mesa chooses non-void Russian baltic birch plywood for their cabs.

For more gear news or to view our completely FREE digital edition, visit http://www.premierguitar.com

Duration : 0:6:1

Read the rest of this entry »

The tooling behind creating curved plywood veneer

Posted by admin on December 24th, 2009 and filed under veneer plywood | No Comments »

Burns Wood Products uses RFS presses with side pressure to create curved plywood veneers.

Duration : 0:5:56

Read the rest of this entry »