A slideshow showing the design and components of our homemade box.
I am working on a set of instructions for everyone so i will have that up asap
Materials List (For two boxes)
6 8 ft 2×4s
4 12 or 10 ft 2×4s
6 10 ft 2×6s
3 4×8 ft plywood sheets
8 10 ft ¾ inch PVC pipes
1 large box three inch screws
1 large box 1 and ¼ inch screws
If you have any questions, I will try my best to answer them.
I hope you guys like what we have made, we take pride in doing a quality job. This project took a total of three days, of 4 hour days prehaps.
We have just finished welding a T-box together, very professional, and we will have a video up as soon as we can.
I encourage everybody to use this design and post a video response! All I ask is that if you use my design, please refer back to my orignal movie and give it proper referrel where it is due.
Backyard park
http://www.youtube.com/watch?v=Pw8tnwbGedI&feature=channel
Be sure to subscribe! 
Duration : 0:4:42
Read the rest of this entry »
This is just a test ride. This is my first time riding it. Yes I know it’s a quarter pipe.
We finally finished my new mini ramp and I couldnt help film a short session on it. The ramp is about 18 inches tall and 5 feet wide. It took about 2 hours to make and was free ( only because wee had all of the items needed to build it.
We used 2 sheets of plywood, 1 sheet of masonite , a half inch peice of wood, 5 2 by 4s, a bunch of ribbed nails, and a pole(cut) for coping.
Please look on my channel if you are interested in how to build the quarter pipe.
Duration : 0:1:19
Read the rest of this entry »
Build a bat house at home to hold a colony of up to 100 bats. Learn how to build a bat house with these materials in this free bat conservation video.
Expert: Brian Foster
Bio: Brain Foster holds two engineering degrees and has been involved in crafts and building and remodeling homes for most of his life. He has manufactured everything from bat houses to gun stocks.
Filmmaker: Robert Rogers
Duration : 0:0:51
Read the rest of this entry »
Click below to get your Warhammer terrain supplies:
http://store.miniwargaming.com/category/warhammer-hobby-supplies/?utm_source=youtube&utm_medium=video&utm_campaign=terrain%2Bvideo%2Bid%3Dwbv5gPHM6y8
win a $100.00 gift certificate to our online Warhammer store by entering in our Warhammer painting tips contest!
For full contest rules click the link below:
http://www.miniwargaming.com/warhammer-painting-and-modeling/miniature-painting/miniwargaming-painting-tips-contest
Hey mini war gamers. This new video shows you step by step how to make a Warhammer gaming board. Stop by your local hardware store and pick up a sheet of 1/2 inch plywood. They usually come on 8′x4′ sections so you may need them to cut the sheet in half.
Buy four 8′long 1×2’s for the framing. Cut them accordingly to fit underneath the plywood top. Watch the video and see the different steps.
Next you apply watered down glue then your fine sand. Once dry apply acrylic paint to seal the sand particles.
Also, here’s the written article for making a warhammer gaming table:
http://www.miniwargaming.com/warhammer-painting-and-modeling/terrain-creation/how-to-make-a-warhammer-gaming-terrain-board/
Subscribe to us and be the first to receive our terrain making videos! (less)
Duration : 0:3:37
Read the rest of this entry »